[cisco-voip] Help: How to change MGCP Voice Payload Size

[Ciscozest]

Hi,

thanks for your info. Since the parameter in under Clusterwide section, I believe this change will affect alll gateways 
in same CCM cluster. Is there a way we can change the value only for certain MGCP gateway or dial-peer in a CCM? thanks


----- Original Message ----- 
From: "Brian Henry" <Brian.Henry at apptis.com>
To: "Ciscozest" <ciscozest at gmail.com>
Sent: Tuesday, November 22, 2005 11:26 PM
Subject: RE: [cisco-voip] Help: How to change MGCP Voice Payload Size


You can change the payload size for MGCP in the service parameters for
CallManager, I do believe you have to click on the Advanced button.

Clusterwide Parameters (System - Location and Region)



If you want to do it with H323 then this link gives an example.
http://www.cisco.com/en/US/products/sw/iosswrel/ps1834/products_field_no
tice09186a008009449d.shtml

Brian

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Ciscozest
Sent: Tuesday, November 22, 2005 10:09 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Help: How to change MGCP Voice Payload Size

Hi all,

I have 3745 MGCP gateway with E1 interface and CCM 3.3(4).  I need to
enable VoIP call to another site router running
H.323 with voice payload size of 30bytes. I couldn;t find any parameters
in CCM for this. Anyone can help? thanks

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip