[cisco-voip] 1mft1 back to back config

[Patrick Nowicki]

you should be able to use a T1 cross over (pins 1,2 flopped with pins 4,5). Then, if you using a PRI, have one side network and one side user. You should be all set...
  ----- Original Message ----- 
  From: Roeseler, David 
  To: cisco-voip at puck.nether.net 
  Sent: Monday, October 10, 2005 9:30 AM
  Subject: [cisco-voip] 1mft1 back to back config


  I have two IOS router with Vwic-1MFt1 cards and two Call Manager servers.

  I want to setup a test network between them, can I connect the mft1 cards with

  back to back with a t1 crossover, or do I need a switch in between like the adtran atlas?



  Thanks,

  Dave 





------------------------------------------------------------------------------


  _______________________________________________
  cisco-voip mailing list
  cisco-voip at puck.nether.net
  https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20051010/b1c55acf/attachment-0001.html