[cisco-voip] Long Distance Calling Problem

[Erick Bergquist]

MGCP? H323? What version of IOS?

What does 'show call hist voice' show for the problem
call? There is a bug in 12.4(3) where it doesn't send
digits out port right and local calls worked but
longer numbers did not. 

Can you post the config (sanitized)?

To really see whats going on, capture following to a
text file.

debug voip ccapi inout
debug vtsp all

--- Joe Toth <JToth at cmefcu.org> wrote:

> Greetings,
>  
> I have a 1760 FXO Gateway that I am trying to make
> long distance or 800
> number calls throught connected to a POTS line. I
> have set up a route
> pattern for this purpose setup as
> 9.1[2-9]XX[2-9]XXXXXX 
>  
> However when I try to make an out going call on this
> gateway I get a
> fast busy signal on the phone and about a second
> after I get the fast
> busy there is an incoming call to the first DN on
> the phone which is
> setup as the Attendant DN for the Gateway. If I
> pickup this incoming
> call there is nothing on it, no audio or caller ID
> information. 
>  
> I can make outgoing local calls on this without
> incident as well as take
> incoming calls from local and long distance. I have
> plugged a regular
> telephone into the line to insure that I can make
> long distance calls on
> the line period and I can.
>  
> I was hoping that someone has run into this before
> or might have an idea
> of how to troubleshoot it. I used the DNA tool and
> determined that CCM
> is picking up the correct route pattern as well as
> gateway for these
> calls. I can also see the activity light on the FXO
> port on the 1760
> light up as well when I attempt to make a call.
>  
> Thanks in advance
>  
> Joe.



		
__________________________________ 
Start your day with Yahoo! - Make it your home page! 
http://www.yahoo.com/r/hs