[cisco-voip] CCM - weird pilot point problem

[Marcus Lundbom]

Is there a codec mismatch or XCode-issue?
I recall seeing an similar issue under those circumstances.

Best regards,
 

/M 

 

________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Vincent De
Keyzer
Sent: Tuesday, September 06, 2005 10:29 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] CCM - weird pilot point problem 



Hello,

 

I have a strange problem with a pilot point that I can reach internally
but not from the outside.

 

DN 7778 is a pilot point (not a hunt pilot) connected to an IVR system.

 

When I dial 7778, the IVR picks up the call and plays the initial
greeting. So far, so good.

 

Then there is a Translation Pattern (used for incoming calls) that maps
a range of 10 external numbers to a range of 10 internal numbers:
1234777X -> 777X.

 

So when I dial from the outside to number 12347778, I should reach the
IVR. But instead I get a fast busy - a "show call history voice" the
gateway shows a "no resource" sent back by the CCM.


The TP pattern works OK because I can call 12347770 (I reach DN 7770).

 

Anyone?

 

Vincent