[cisco-voip] Help with ISDN VIC2-2BRI-NT/TE cable and configuration

[Harald Klein]

Hi Lawrence,

>1. First and foremost can I hook my single pair (2 wire, U interface
>from PacBell) RJ11 into the RJ-45? I really can't tell as all the
>Cisco doc shows 4 wire connections to an NT1 but the doc for this
>card claims "build in NT1".

VIC2-2BRI-NT/TE - Two-port ISDN BRI VIC, S/T interface, NT or TE
it is S/T, not U.

>
>2. What kind of config do I need to get this running? Is what follows
>even close? If I knew I had the cabling right I could focus on the
>config. I really can't find a good example on the Cisco site, DSL
>Reports, or the web. If someone has a sample config known to work
>with BRI voice that would be great.
>
look here:
http://www.cisco.com/en/US/tech/tk652/tk653/technologies_tech_note09186a0080111b16.shtml
and here:
http://www.cisco.com/en/US/products/sw/iosswrel/ps5013/products_feature_guide09186a0080080de8.html
(with samples)

>4. Do I need both the global "isdn switch-type" and the interface
>"isdn switch-type"?

interface overrides global..

>Best,

much phun, hari
>
>leb)