[cisco-voip] Caller ID

[Justin Steinberg]

What is your ISDN switch type?

On 4/21/06, Ward Knutson <ward_knutson at educ8.org> wrote:
>
>  I recently changed my gateway from a H.323 with 1-T1 PRI to a MGCP with
> 2-T1 PRI's.  The T1's are pooled and I am having trouble passing caller ID
> information on outgoing calls.  Before I was able to set the Caller ID DN to
> 701355XXXX and it worked fine.  Since I have two different set of DID's tied
> to these T1's I can't use the same settings.  I tried 10 X's and also tried
> to leave the Caller ID DN blank but then I get the number that is associated
> to the T1 from the service provider.  This it how I have it set now.
>
>
>
> Calling Line ID Presentation                                Allowed
>
> Calling Party Selection                                       Originator
>
> Called party IE number type unknown                  Cisco CallManager
>
> Calling party IE number type unknown                 Cisco CallManager
>
> Called Numbering Plan                                       Cisco
> CallManager
>
> Calling Numbering Plan                                      Cisco
> CallManager
>
> Number if digits to strip                                       1
>
> Caller ID DN
> 7013553000
>
> SMDI Base Port                                                 0
>
>
>
> If you have any ideas they would be greatly appreciated.
>
>
>
>
>
> Ward Knutson
>
> Network Coordinator
>
> Bismarck Public Schools
>
> Bismarck, North Dakota
>
> ward_knutson at educ8.org
>
> 701-355-3037 Office
>
> 701-527-4034 Cell
>
>
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060421/2a1753d0/attachment.html