[cisco-voip] Configuring Cisco 2811 for voice

[Graham, Darel]

Hi all,

I've run up against a problem with a Samsung DCS that has been modified
to get it in to Mexico. 
Bad way to start, I know. 


The customer states that this is set for R2MFC, dtmf and E&M wink or
immediate start. I have tried variations of Cisco configurations for R2,
and none worked. 
Is there anyone that knows the secret to this configure this pbx? BTW
Samsung rep in Mexico stated that they have not been able to get a Cisco
to work with it. Of course they didn't say that they had any router
working with it either. 

So, if anybody wants a crack at it I'll be glad to try whatever (within
reason) to get this to work. I'll be the first to admit I'm not an
expert on this type of configuration. 

If you wish to contact me to discuss this further just e-mail me
directly. And thank you for those that respond. 

Darel Graham
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060801/ddb5cc62/attachment-0001.html