[cisco-voip] Configuring Cisco 2811 for voice

[Teodor Georgiev]

 Darel,

Samsung DCS PBXes work pretty fine with Cisco voice gateways.

1. There are several types of this PBX --> DCS Compact / 2, iDCS, DCS Euro.

I doubt your model is iDCS, because it is a NG-model with VoIP capabilities 
and LAN port for management (other have only RS-323 and SIM management 
options).

The Compact models do not support R2, they support only ISDN PRA and BRA. So, 
I suppose your model is not Compact as well.

Check and report your exact model. See the card types you have (E&M, E1 R2, 
PRI). If you have an ISDN card, you can configure it for ETSI or QSIG. 

I am not aware of the T1 cards for Samsung DCS PBXes however. Are you sure it 
is really R2 MFC over E1 ?

On Tuesday 01 August 2006 16:43, Graham, Darel wrote:
> Hi all,
>
> I've run up against a problem with a Samsung DCS that has been modified
> to get it in to Mexico.
> Bad way to start, I know.
>
>
> The customer states that this is set for R2MFC, dtmf and E&M wink or
> immediate start. I have tried variations of Cisco configurations for R2,
> and none worked.
> Is there anyone that knows the secret to this configure this pbx? BTW
> Samsung rep in Mexico stated that they have not been able to get a Cisco
> to work with it. Of course they didn't say that they had any router
> working with it either.
>
> So, if anybody wants a crack at it I'll be glad to try whatever (within
> reason) to get this to work. I'll be the first to admit I'm not an
> expert on this type of configuration.
>
> If you wish to contact me to discuss this further just e-mail me
> directly. And thank you for those that respond.
>
> Darel Graham