[cisco-voip] Blind transferred calls to Hunt Group dropped beforereaching Unity

[Jason Aarons (US)]

I did notice if I make the gateway a MTP Required it works as well, try
this, but don't leave it permanent.

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of avaya admin
Sent: Monday, August 21, 2006 8:21 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Blind transferred calls to Hunt Group dropped
beforereaching Unity

Hi -- I haven't posted in this list in a long time. I have an issue
that I can't seem to figure out yet. Scenario on CM 4.1

PSTN ISDN to MGCP GW with CSS-Inhouse to DN 4000 on PT-Inhouse
4000 answers calls and blind tranfers to Hunt pilot 7000 on PT-Inhouse
No answer on hunt pilot 7000 caller gets an engaged tone instead of
Unity Greeting

If 4000 does a supervised transfer, call always works. Blind never works

In Unity I don't see any acitviy in the call viewers or status monitor
when calls is blind transfered.

DNA shows that Gateways has acess to the hunt pilot and VM.

I played with maximun hunt timer on hunt pilots config but didnt' work
(tried 20 seconds)


Any tips on where to start?
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.