[cisco-voip] 7961 no mwi

[Jonathan Charles]

You need to go to Service Parameters, TFTP, click advanced, and under Build
CNF files, change the parameter to Build-All, otherwise the cnf files are
built dynamically.



Jonathan

On 12/11/06, Melvin Fong <mfong at pacific.edu> wrote:
>
> We have a problem with a single 7961 configuration.  We cannot get mwi to
> work.  We have replaced the set with the same results.   We have already
> deleted the set and rebuilt it but with the same results.  Where are the
> cnf.xml phone config files located?  We want to delete the file and
> rebuild the set.  We are using CM 4.1(3)sr3c. Thanks for any and  all
> suggestions.   Mel
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20061211/7d861975/attachment.html