[cisco-voip] 7961 no mwi

[Ryan Ratliff]

Simply restarting TFTP gets the cnf.xml file rebuilt.

For the MWI issue is the DN on that phone also present in another  
partition?

Try giving that phone a DN that is a shared line on a phone where MWI  
does work, this will show you the phone physically can light the  
MWI.  If this works then it's just a config issue, most likely with  
partitions/css.

-Ryan

On Dec 11, 2006, at 10:18 AM, Melvin Fong wrote:

We have a problem with a single 7961 configuration.  We cannot get  
mwi to work.  We have replaced the set with the same results.   We  
have already deleted the set and rebuilt it but with the same  
results.  Where are the cnf.xml phone config files located?  We want  
to delete the file and rebuild the set.  We are using CM 4.1(3)sr3c.  
Thanks for any and  all suggestions.   Mel


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip