[cisco-voip] T1 CAS hookflash transfer

[Jonathan Charles]

debug voip ccapi inout

Will show you all signaling messages sent down the T1...

However, what you really need is an E&M T1 CAS on a 6608 blade...

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_administration_guide_chapter09186a00801ec5cb.html

It doesn't appear to work on non-6608 blades..




Jonathan

On 12/21/06, Jason Burton <jburton at netechcorp.com> wrote:
>
>  Currently we have a customer that has their callmanager system integrated
> in with a 3rd party IVR. The only integration the 3rd party will support
> is T1 CAS.  The good news is we were able to take the callcenter piece away
> and are running that with IPCC.  The problem I'm having is when you call
> into the 3rd party IVR and say press 3 to be connected to the callcenter
> the call drops.  The 3rd party vendor is telling me they are doing a
> hook-flash transfer is there any way for me to debug this and make sure it
> is happening?  The integration is CM<->2811(MGCP)<->T1 CAS->Dialogic
> board<->3rd party IVR.
>
>
>
> Thanks!
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20061221/b76eb3b5/attachment.html