[cisco-voip] CallManager Tone Configuration

[Martin Lohnert]

AFAIK, tones such as dialtone, busy, ring-out etc. are set by "Network
Locale."  So if your phones have different network locales assigned, they
will get different tones. This can be set at Device Pool, or the Device
itself...
Cheers,
Martin


On 2/13/06, Alan Su <cj.alan at gmail.com> wrote:
>
> Dear All,
>
> I was wondering if the tone heard from IP Phone can be configured in
> CallManager?
> 'Cuz one of my customer complained that the IP Phones they are using which
> are registered to different CallManagers present different tone when
> off-hook. I read the CCM admin guide but didn't find anything about this,
> only the locale might affect the tone. Does anyone have idea how to fix it?
> Any comment would be grateful. Thanks a lot~
>
>
> Regards,
>
>
> Alan
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060214/d17f0071/attachment.html