[cisco-voip] Toggling CCM MWI without a phone

[Wes Sisk]

You can enable multitenant MWI and setup special translation patterns  
so that you can turn mwi on/off for any extension by dialing special  
destination number:

ServiceParameters:
MultiTenantMWIMode=True

Phones:
x1000 css=ProxyMWI  calling party used to turn mwi on/off
x1001 one of the extensions to turn MWI on/off for

1999 partition=MWI MWIOff number
1998 partition=MWI MWIOn number

translation patterns:
11001 partition=ProxyMWI css=MWI calling=1001 called=1998
01001 partition=ProxyMWI css=MWI calling=1001 called=1999

/Wes

On Jan 2, 2006, at 1:43 PM, Justin Steinberg wrote:

Is it possible to turn off (or on for that matter) the MWI status on a
per extension basis using any admin tool?

I know that I could register a phone with the DN in question, but I'm
looking for a quicker way...ccmadmin, command line, etc...

Thanks

Justin

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip