[cisco-voip] Call is disconnected at Remote Site when User answers

[John Kienzle]

Without further detail, any thoughts on the problem below?

Intermittent Issue:
1) Incoming local PSTN calls at remote site go to corporate Unity call
handler.
2) Caller dials extension to connect to.
3) Remote site user tries to answer incoming call, but call is
disconnected.

CCM pub/sub is located in corporate office. Remote site connected
through Frame Relay connection.

CCM is 4.1.3 3a
Unity is 4.0.4. sr1





John Kienzle
Western Gas Resources
Field Support Analyst, Gillette




CONFIDENTIALITY NOTICE:
This e-mail transmission, along with any attachment, is confidential, may be privileged and should be read and retained only by the intended recipient without further distribution. If you received this transmission in error, please notify the sender and delete it from your system immediately.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060523/4aa00b10/attachment.html