[cisco-voip] srst pri prblem

[Aman Chugh]

Hi,

Make sure you have configuration as per this for MGCP FALLBACK in SRST.

http://www.cisco.com/univercd/cc/td/doc/product/voice/srst/srst33/srst33ad/srs_wlan.htm#wp1352310


Aman


On 11/8/06, gokhan senol <gokhanciscottl at yahoo.com> wrote:
>
>
>
> hi,
>
> during CCM fallback , phones register srst gateway but i can not make
> outboundcall  from PRI line but when i use access-code fxo everything is ok,
> i can call PSTN
> note:my pri line works when CCM works.
> part of the config is below.it's mgcp gateway.
>
> dial-peer voice 9 pots
> destination-pattern 9T
> direct-inward-dial
> port 0/2/0:15
> !
> !
> call-manager-fallback
> max-conferences 8 gain -6
> ip source-address 172.16.0.3 port 2000
> max-ephones 40
> max-dn 50
> access-code pri 9 direct-inward-dial
>
>
>
>
> IOS:c2800nm-ipvoicek9-mz.124-10.bin
>
> thkns a lot
>
>
>
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20061108/7b8cb146/attachment.html