[cisco-voip] srst pri prblem

[Turpin, Mark]

Because the access-code is building your dial peers (correctly) for you.
 
You can use one or the other; access-codes or building your own
dial-peers.
 
Your pots peer needs to be controlled by mgcp.
 
-Mark

________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of gokhan senol
Sent: Wednesday, November 08, 2006 3:05 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] srst pri prblem



 

hi, 

during CCM fallback , phones register srst gateway but i can not make
outboundcall  from PRI line but when i use access-code fxo everything is
ok, i can call PSTN 
note:my pri line works when CCM works.
part of the config is below.it's mgcp gateway. 

dial-peer voice 9 pots 
destination-pattern 9T 
direct-inward-dial 
port 0/2/0:15 
! 
! 
call-manager-fallback 
max-conferences 8 gain -6 
ip source-address 172.16.0.3 port 2000 
max-ephones 40 
max-dn 50 
access-code pri 9 direct-inward-dial 




IOS:c2800nm-ipvoicek9-mz.124-10.bin 

thkns a lot 



 


-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20061108/df90309a/attachment.html