[cisco-voip] Route Pattern

[Ryan Ratliff]

Put the 9191 translation pattern in a partition only reachable by the  
CSS applied to the gateway.

-Ryan

On Oct 19, 2006, at 11:08 AM, David Fielder ((US)) wrote:

I have a situation where my customers Telco are sending 4 digits to  
the gateway. One of the locations main numbers is 292-9191 and the  
9191 is being translated in CallManager to 7540. The problem is when  
they try to place an outbound long distance call to 9.1919XXXXXXX  
CallManger sends the call to 7540. What would be the best way to  
allow both within CallManager.





David Fielder

Senior Engineer

Dimension Data

Office: (336) 510-9431

Mobile: (336) 669-5129

david.fielder at us.didata.com





Disclaimer: This e-mail communication and any attachments may contain  
confidential and privileged information and is for use by the  
designated addressee(s) named above only. If you are not the intended  
addressee, you are hereby notified that you have received this  
communication in error and that any use or reproduction of this email  
or its contents is strictly prohibited and may be unlawful. If you  
have received this communication in error, please notify us  
immediately by replying to this message and deleting it from your  
computer. Thank you.

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip