[cisco-voip] Passing calls from CCM to Unity CallHandler

[Aman Chugh]

Translation patterns is what I would recommend ,if you want a call to land
directly in Unity.

Aman


On 9/24/06, Ed Leatherman <ealeatherman at gmail.com> wrote:
>
> Hi folks,
>
> I'm curious how other people setup call handlers in CCM and Unity..
> specifically how you route a call to an extension directly to a Unity Call
> Handler. Is there a "Cisco Recommended" way to do this?
>
> Right now i'm making hunt pilots and pointing them at the Unity lines and
> then creating a call routing rule. In the past though I've used dumby phones
> or CTI Route ports to forward to Unity. That seemed kinda clunky so I
> started using the hunt pilots once I realized I could.
>
> --
> Ed Leatherman
> Senior Voice Engineer
> West Virginia University
> Telecommunications and Network Operations
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060924/6db98468/attachment.html