[cisco-voip] Updating the E911 database

[Joe Pollere (US)]

You can check here for Verizon Instructions:

 

http://www22.verizon.com/wholesale/local/E911/1,21070,,00.html

 

or call someone at the Verizon E9-1-1 System Administration team

 

They can be reached via email at e911.system.admin at verizon.com or via
the telephone numbers below:

 

Donna Beecher             914-644-2150             

Linda Kerkam              914-682-0592             

Julie Leahy                   617-743-3199             

Joyce Juliano-Pais                    732-818-7806

Thomas J. Louden, Jr   215-451-2758

 

Rich Boland, Manager  215-451-0203             

 

 

________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Ed Leatherman
Sent: Tuesday, April 03, 2007 4:23 PM
To: Robert Kulagowski
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Updating the E911 database

 

We had to get PS-ALI service through verizon for this. The folks at the
PSAP really didnt know what we even wanted, so we had to go with what
Verizon told us. We're not paying that much for it though, I think its
$10/month per block of 100 records, with a minimum number of blocks that
we have to purchase. Verizon is our local carrier though. 

On 4/3/07, Robert Kulagowski <bob at smalltime.com> wrote:

We're consolidating offices in NY; two offices will move into the same
building onto different floors.

ATT is going to be our LD and Local provider (last mile is probably
Verizon).  We use Cisco Emergency Responder.  In Illinois, you used to 
be able to tell Ameritech "These DIDs are on floor X, and these are on
floor Y", configure the ELINs in CER to route to those particular DIDs
and you were good.

In NY, ATT says they don't do that, and that you have to contact a 3rd 
party to get the information updated in the PSAP database.

Since I'm going to use two DIDs per floor, that means that I need four
all together.  Two of them should already show that they're on floor X -

I need to get the remaining two to show that they're on floor Y.

ATT sent a Word doc that had 911 ETC, Redsky and OM2 Technology as SLI
(Station-level Identification) vendors.  Since I've already got CER, are

there any vendors that will just update the two numbers and call it a
day?  The one response that I've got back is something like $3K, and
then another $312 monthly, which seems pretty steep for something that's

not going to change.  They all seem to be geared around doing
moves-adds-changes and updating the PSAP, which isn't required with CER.

Does anyone have any other vendors that do these database updates?  Am I

doing this the hard way if there's a much cheaper / easier way to do
this?
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net 
https://puck.nether.net/mailman/listinfo/cisco-voip




-- 
Ed Leatherman
Senior Voice Engineer
West Virginia University
Telecommunications and Network Operations 



-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070403/0e8451a6/attachment-0001.html