[cisco-voip] Caller ID from analog lines

[Ed Leatherman]

I think you need to use H323 for callerID to work on the FXO ports. I'll go
look thru my notes after lunch unless someone else can confirm that.

On 4/5/07, Pennington, Craig <cpennington at ncaa.org> wrote:
>
>  I remember this was discussed a few weeks ago.  I did not pay close
> attention then since I had never had any requests relating to caller ID on
> analog lines but of course now I have one.  Please remind me what the issue
> is with not getting caller ID passed on when the call comes in an analog
> line.  In our case our 2 remote offices have analog lines going into
> a vic2-4fxo in a 2821 router.
>
>  Craig Pennington
> Network Engineer
> *N*ational *C*ollegiate *A*thletic *A*ssociation
> cpennington at ncaa.org
> www.ncaa.org
>
>
> This email and any attachments may contain confidential and privileged
> information. If you are not the intended recipient, please notify the
> sender immediately by return email, delete this message and destroy any
> copies. Any dissemination or use of this information by a person other
> than the intended recipient is unauthorized and may be illegal.
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>


-- 
Ed Leatherman
Senior Voice Engineer
West Virginia University
Telecommunications and Network Operations
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070405/23aa5d5a/attachment-0001.html