[cisco-voip] TFTP Server 1 and TFTP Server 2 ?

[dhartma5 at optonline.net]

   Make sure you use the "Array" checkbox if you're using a Microsoft DHCP server.  I'm not sure about Windows 2003 server, but I know this is how it works in W2K SVR.

Dennis Hartmann
White Pine Communications


----- Original Message -----
From: Robert Kulagowski 
Date: Sunday, April 22, 2007 2:52 pm
Subject: Re: [cisco-voip] TFTP Server 1 and TFTP Server 2 ?
To: Cisco Voip 

> Zevier Thoran wrote:
> > Hi,
> > How can I have my IOS DHCP Server dish out two numbers of 
> TFTP Server 
> > IP Addresses to my IP Phones - one for the Pub and the other 
> for the Sub.
> > Thanks - Zevier.
> 
> Just put them one after another
> 
> option 150 ip 1.1.1.1 2.2.2.2
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070423/23adc04d/attachment.html