[cisco-voip] Call Mgr Server Data

[CarlosOrtiz at bayviewfinancial.com]

Does CUOM use SNMP and WMI?  When I tested it a while back I remember 
having to set up the SNMP strings in order to get it to work.

Carlos



"Mike Lay \(milay\)" <milay at cisco.com> 
Sent by: cisco-voip-bounces at puck.nether.net
04/24/2007 04:59 PM

To
<CarlosOrtiz at bayviewfinancial.com>, <cisco-voip at puck.nether.net>
cc

Subject
Re: [cisco-voip] Call Mgr Server Data






Any application that has not been certified with Cisco to work with the 
CCM would be unsupported. If this tool was causing issue with CCM TAC 
would ask that it be stopped. 
 
CUOM as other 3rd party supported applications uses the WMI interface to 
subscribe for events, etc... Pulling event logs from the servers can cause 
high CPU on the server it is being pulled from the server:
 
CSCsh75491
 
I would recommend AXL/Soap or the SNMP mibs as a interface to pull the 
performance data rather than WMI.

Mike

From: cisco-voip-bounces at puck.nether.net 
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of 
CarlosOrtiz at bayviewfinancial.com
Sent: Tuesday, April 24, 2007 3:50 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Call Mgr Server Data


Is collecting SNMP and WMI data from Call Mgr servers fully supported by 
Cisco.  We want to start collecting information about our servers but want 
to make sure we do not introduce anything that is not TAC supported. 

Carlos_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070424/839bd2a3/attachment.html