[cisco-voip] Unity System Administration/Status Monitor Page

[Dockendorf, Dave]

I just built Unity 4(2)1, I am getting the following error when trying
to open the System Administration or Status Monitor page... 
 
Server.CreateObject(AvSaLocalization.AvSaLocalization.1) failed. 
This is most likely an error with a DLL, probably
AvSaLocalizationSvr.dll or 
perhaps AvSaLocaleInfoSvr.dll. 
Check that these files are present, and registered with REGSVR32. 
Also be sure that the appropriate MsgStoreRes.dll file is present. 
Cannot continue. 
(From: Global.asa: hr=0x80040154) 

 
Anyone have ideas??

  

 

 

Dockendorf, Dave
Senior Network Engineer

Ecolab Inc.
655 Lone Oak Drive
Building E, 3rd Floor
Eagan, MN 55121
<http://maps.yahoo.com/py/maps.py?Pyt=Tmap&addr=655+Lone+Oak+Drive&csz=E
agan%2C+MN+55121&country=us>  

Dave.Dockendorf at ecolab.com <mailto:Dave.Dockendorf at ecolab.com>  

tel: 
mobile: 

651-795-5105
651-248-7040 

 

 

 

 

 

CONFIDENTIALITY NOTICE: This e-mail communication and any attachments may contain proprietary and privileged information for the use of the designated recipients named above. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070424/a75c04b8/attachment-0001.html