[cisco-voip] SIP /SCCP call forwarding

[Matt Slaga (US)]

It has to do with supplemental features.  Some supplementary features require a "middle-man" of sorts to place the call on hold, hence the need for the MTP.  Same with older H323 v1 gateways.  

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Ahmad Cheikh Moussa
Sent: Monday, January 29, 2007 9:49 AM
To: vloschiavo at data-corporation.com
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] SIP /SCCP call forwarding

Hi Vince,
Vince Loschiavo wrote:
> I think you'll need a media termination point for doing forwards, transfers, etc with h323. 
> 

why do I need a media termination point. When I make a call from the 7940 to the asterisk voicebox, it works without a problem.
Where is the difference between a direct call and a forwarded call ?

Regards,
 Ahmad



--
Ahmad Cheikh-Moussa
NetUSE AG
Dr.-Hell-Straße, 24107 Kiel, Germany
Telefon: +49 431 2390 400 --  Telefax: +49 431 2390 499
Service: Service at NetUSE.DE --  http://NetUSE.DE/


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.