[cisco-voip] CAS T1 E&M lines seized and stuc

[Paul Choi]

We're not even seeing calls hit the router right now.
We're waiting for the telco to get on the line here
with TAC. :(



--- Tim Jackson <jackson.tim at gmail.com> wrote:

> I've seen some 1/0 DACS equipment cause this
> before... It'd lose the
> signaling bits through the cross-connect... What
> does the LSB signaling look
> like if you put a test set on the T1? Can you send a
> wink & make the far-end
> change?
> 
> --
> Tim
> 
> On 6/8/07, Paul Choi <asobihoudai at yahoo.com> wrote:
> >
> > I have a customer's office whose lines are stuck
> in
> > seized mode. It's a CAS T1 using E&M signaling.
> Nobody
> > from outside the CCM cluster can call the office,
> they
> > can't call outside the office.
> >
> > Any ever run into this?
> >
> > Paul
> >
> >
> >
> >
> >
>
____________________________________________________________________________________
> > Be a better Globetrotter. Get better travel
> answers from someone who
> > knows. Yahoo! Answers - Check it out.
> >
>
http://answers.yahoo.com/dir/?link=list&sid=396545469
> > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip at puck.nether.net
> >
> https://puck.nether.net/mailman/listinfo/cisco-voip
> >
> 



 
____________________________________________________________________________________
We won't tell. Get more on shows you hate to love 
(and love to hate): Yahoo! TV's Guilty Pleasures list.
http://tv.yahoo.com/collections/265