[cisco-voip] Cannot add phone to CCM 5.1(1)

[Jonathan Charles]

OK, go get a real license first then try it.

Instructions are in another email in this thread.




Jonathan

On 3/7/07, Anthony Kouloglou <akoul at dataways.gr> wrote:
>
>  Thanks Jonathan,
> i have tried to delete a phone so i could free some space but it failed.
> i can on;y edit a non useful phone with the new mac address.
>
> Anthony
>
> Jonathan Charles wrote:
>
> When you migrate data from 4.1 to 5.X using DMA, you get a free license
> from Cisco for what you had set up at the time of the migration of data.
>
> If you go to System - Licenses - Upload Licenses, you will see a temp
> license sitting there, click view.
>
> Go to www.cisco.com/go/license and enter that license and the MAC for your
> CCM server (5.X) and Cisco will email you a permanent license.
>
> It takes about 2 minutes and you get a license with a free 5%
> oversubscription rate...
>
>
>
> Jonathan
>
> On 3/7/07, Ruben Montes (Europe) <Ruben.Montes at eu.didata.com> wrote:
> >
> >  Hi,
> >
> > from my recent experience, whenever you do an upgrade from 4.x to 5.x,
> > you have to ask Cisco for a License. As you know, CCM5.x is based in
> > licenses, so when you do the upgrade you should take a temporal license that
> > is created during the upgrade that makes it all work correctly, but if you
> > want to add a device you can't: you should buy a license upgrade based in
> > units from Cisco...
> >
> > Regards,
> >
> > Ruben
> >
> > ------------------------------
> > *De:* cisco-voip-bounces at puck.nether.net en nombre de Anthony Kouloglou
> > *Enviado el:* mié 07/03/2007 13:27
> > *Para:* cisco-voip at puck-nether.net
> > *Asunto:* [cisco-voip] Cannot add phone to CCM 5.1(1)
> >
> >  Hi,
> > i am very new at 5.1 and i have found some difficulties adding a new
> > phone:
> > I have installed a new 5.1 installation and imported a tar file from an
> > old 4.1 installation.
> > The system booted and all the settings (phones, users etc) seem to be
> > imported OK)
> > Then o tried to add a new 7960 phone but after i have given the MAC
> > address all the rest necessary fields i clicked
> > add and i got:
> >
> >  Status  [image: Error Message] Update failed. [4917] License file not
> > loaded
> > I know it has something to do with the Phone Secutiry Profiles but that
> > is as far as i get.
> >
> > Any ideas?
> >
> > Thanks A lot
> >
> > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-voip
> >
> >
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070307/99317707/attachment-0001.html 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/gif
Size: 1323 bytes
Desc: not available
Url : https://puck.nether.net/pipermail/cisco-voip/attachments/20070307/99317707/attachment-0001.gif