[cisco-voip] 7970s dark after phoneload update

[David Sullivan]

cisco-voip-bounces at puck.nether.net wrote:
> Yea, after the cable/power was unplugged and plugged back in,
>  all is fine with the phones with problem.
> 
> Not sure about the background since they use default, so...
> but when you got a cluster with say 500 phones and 40 or so
> are in this state , both locally to the CCM and some remote
> people start to ask what is going on with the phones.
> 
> Thanks

One thing worth mentioning is that if you're powering the phone using
power over ethernet switches is that if you shutdown and then no
shutdown the port this will reset the power to the port, I've used this
to unstick one phone remotely before now when it wasn't even dhcping an
address for some reason without going all the way over there.

David.
-----------------------------------------------------------------------------
This communication may contain privileged or confidential information which
is for the exclusive use of the intended recipient.  If you are not the
intended recipient, please note that you may not distribute or use this
communication or the information it contains.  If this e-mail has reached you
in error, please delete it and any attachment.

Internet communications are not secure and Barnet College does not accept
legal responsibility for the content of this message.  Any views or opinions
expressed are those of the author and not necessarily those of Barnet College.

Please note that Barnet college reserves the right to monitor the
source/destinations of all incoming or outgoing e-mail communications.
-----------------------------------------------------------------------------