[cisco-voip] Outbound call routing

[James Williams]

> My guess is you're running debug commands from a non-console session 
> [i.e.; telnet/ssh].  Remember to enable terminal monitoring ('term mon' 
> from enable mode).  Without it all your debugs will only get spit out 
> the console port.

I've checked that; I'm not even getting them off the console port. It's not just the VoIP debugs, either; I can't get _any_ debugs to show up, even something like 'debug ip routing' (which, since this is on a core router, should spam me into oblivion) spits back nothing at all.

Has anyone else experienced this, and if so, was it easily correctable?

-James