[cisco-voip] CCM BARS Restore
CarlosOrtiz at bayviewfinancial.com
CarlosOrtiz at bayviewfinancial.com
Thu May 3 10:01:39 EDT 2007
Yes it's plugged in. I have copied files to and from the server (patches,
etc) and I am remote controlling the box right now.
Carlos
"Johnny Crothers" <Johnny.Crothers at vanco.co.uk>
05/03/2007 09:48 AM
To
<CarlosOrtiz at bayviewfinancial.com>
cc
Subject
RE: [cisco-voip] CCM BARS Restore
Just wandering… but is your NIC plugged in? I know this is probably a dumb
question, but a lot of services wont start if the NIC with the correct IP
is actually connected.
From: CarlosOrtiz at bayviewfinancial.com
[mailto:CarlosOrtiz at bayviewfinancial.com]
Sent: 03 May 2007 14:43
To: Johnny Crothers
Subject: Re: [cisco-voip] CCM BARS Restore
Yes it is along with the IIS admin.
After rebooting again all services are started except the Call Mgr Service
which is in a "starting" state. This was what it looked like this morning
when I came in but after a few minutes the Call Mgr service status showed
started. I rebooted to see if it does the same thing again, but at this
point it's in a "starting" state.
"Johnny Crothers" <Johnny.Crothers at vanco.co.uk>
Sent by: cisco-voip-bounces at puck.nether.net
05/03/2007 09:04 AM
To
<CarlosOrtiz at bayviewfinancial.com>, <cisco-voip at puck.nether.net>
cc
Subject
Re: [cisco-voip] CCM BARS Restore
Check that the WWW service is started.
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of
CarlosOrtiz at bayviewfinancial.com
Sent: 03 May 2007 13:55
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] CCM BARS Restore
Update on this. I came in this morning and all the services are now
actually started. I still can't login to the CCM admin page though. I am
checking CCO now for help but if anyone has seen this please comment.
Carlos
Carlos Ortiz/MIA/BAY/BFTG
05/02/2007 03:58 PM
To
Cisco-Voip List
cc
Subject
CCM BARS Restore
I just did a BARS 4.10 restore of CCM 4.1.3. The only errors in the log
are because the 2 subscribers could not be connected to which I expected.
Everything else shows completed successfully. When I reboot the server
the following services are in a hung "Starting" state.
Cisco Call Mgr
CDR Insert
CTI Manager
Database Layer Monitor
RIS Data Collector
TFTP
Anyone seen this before?
**********************************************************************
Any opinions expressed in the email are those of the individual and not
necessarily the company. This email and any files transmitted with it are
confidential and solely for the use of the intended recipient. If you are
not the intended recipient or the person responsible for delivering it to
the intended recipient, be advised that you have received this email in
error and that any dissemination, distribution, copying or use is strictly
prohibited.
If you have received this email in error, or if you are concerned with the
content of this email please e-mail to: e-security.support at vanco.info
The contents of an attachment to this e-mail may contain software viruses
which could damage your own computer system. While the sender has taken
every reasonable precaution to minimise this risk, we cannot accept
liability for any damage which you sustain as a result of software
viruses. You should carry out your own virus checks before opening any
attachments to this e-mail.
Vanco UK Ltd Registered in England No: 2296733 Registered Office: John
Busch House, 277 London Road, Isleworth, Middlesex TW7 5AX
Please consider the environment before printing this e-mail
**********************************************************************
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070503/7c3cbfe0/attachment-0001.html
More information about the cisco-voip
mailing list