[cisco-voip] FXS port getting stuck

[Paul Choi]

Have you narrowed the issue down to the card itself?
Is the device connected to that port terminating the
connection properly or not? Have you tried different
signaling schemes?

--- Aman Chugh <aman.chugh at gmail.com> wrote:

> Group,
> 
> I have a fxs port on a router which seems to be
> acting up, I have 2851
> router with 12.3.11T with a vic4fxs card, The Issue
> seems to be with only
> one port which gets stuck after it gets a call and
> then remains off hook and
> I have to do a shut no shut on the port to bring it
> to normal , Sometimes it
> takes a lot of time with that as well, Am I looking
> at bad port and would
> need to rma the card , any suggestions
> 
> Router is an MGCP g/w on cm.
> CM 4.1.3
> 
> TIA
> Aman
> > _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
> 


__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com