[cisco-voip] Voicemail in SRST Mode
Linsemier, Matthew
MLinsemier at apcapital.com
Tue May 8 09:31:43 EDT 2007
Currently we are running CallManager 4.1(3)sr3 along with Unity 4.2(1).
We currently are using MGCP to control all of our gateways from a
centralized cluster and utilize SRST at remote sites for failover. I
was wondering if anyone has been successful, while in SRST mode, of
redirecting an inbound call after a set amount of rings to their
voicemail server, and have the subscribers message play rather than the
main Unity greeting. We are using ISDN PRI at our remote sites. I know
that there were some commands that you could configure to send digits to
the Unity server, but from what I understand those were only supported
in a analog configuration.
Below is a excerpt of my call-manager fallback config:
call-manager-fallback
voicemail 91517xxxxxxx
call-forward busy 91517xxxxxxx
call-forward noan 9517xxxxxxx timeout 12
Any help would be greatly appreciated.
Matt
CONFIDENTIALITY STATEMENT
This communication and any attachments are CONFIDENTIAL and may
be protected by one or more legal privileges. It is intended
solely for the use of the addressee identified above. If you
are not the intended recipient, any use, disclosure, copying
or distribution of this communication is UNAUTHORIZED. Neither
this information block, the typed name of the sender, nor
anything else in this message is intended to constitute an
electronic signature unless a specific statement to the
contrary is included in this message. If you have received this
communication in error, please immediately contact me and delete
this communication from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070508/c2b5ca64/attachment.html
More information about the cisco-voip
mailing list