[cisco-voip] Dialing from the IP phone's corporate directory

[Paul Choi]

Jonathan, 

You're right.

We checked on a different server and it was NOT the
case that we had all of our users in the active
directory.

Back to the drawing board... :(

Paul

--- Jonathan Charles <jonvoip at gmail.com> wrote:

> This seems highly unlikely. However, it could be
> done...
> 
> Usually, what we when we integrate CCM with AD/LDAP
> is we connect to
> the customer's AD infrastructure, not Unity (Unity
> can either be
> pulling from AD or be its own standalone domain if
> it is just vmail
> only).
> 
> It would be very strange if you integrated CCM with
> Unity's AD infrastructure...
> 
> 
> 
> Jonathan
> 
> On 5/21/07, Paul Choi <asobihoudai at yahoo.com> wrote:
> > My co-worker discovered that the corporate
> directory
> > pulls its DNs from Active Directory on the Unity
> > server. We will most likely append 91 to all DNs
> under
> > active directory so users can dial directly using
> > that.
> >
> > I hope this information is useful to someone.
> >
> > Paul
> >
> >
> >
> >
>
____________________________________________________________________________________
> > It's here! Your new message!
> > Get new email alerts with the free Yahoo! Toolbar.
> >
> http://tools.search.yahoo.com/toolbar/features/mail/
> > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip at puck.nether.net
> >
> https://puck.nether.net/mailman/listinfo/cisco-voip
> >
> 



 
____________________________________________________________________________________
Now that's room service!  Choose from over 150,000 hotels
in 45,000 destinations on Yahoo! Travel to find your fit.
http://farechase.yahoo.com/promo-generic-14795097