[cisco-voip] Messages softkey

[Matt Slaga (US)]

The messages button is hard coded in to the 7905, 7906, 7911 and 7912.
Other than reprogramming the firmware, there is no way to remove the
softkeys.

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Kelemen Zoltan
Sent: Wednesday, May 23, 2007 7:47 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Messages softkey

Hi!

I hqave some 7911G (and 7906G) Cisco IP phones, right now on a CCME.

is there a way to disable the "Messages" softkey in either CallManager, 
or CCME? Right now I have a CCME, that does not have any voicemail 
setup, but the Msgs button insists to stay on-screen.

The ephone-template -> softkeys configuration options don't even include

the Msgs softkey, so I can't enable/disable it, neither can I move it 
around. It seems it gets placed automatically in the third position, or 
less if only one other softkey is defined in the template.

The telephony-service configuration does not include voicemail. IOS is 
C2800NM-SPSERVICESK9-M, Version 12.4(11)T, obviously, with CCME 4.0(2)

As far as I recall, I found it similarly close to impossible to remove 
it from CallManager as well.

Thanks,
  Zoltan
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.