[cisco-voip] Cisco phones shipping with bad manufacturing loadthatcan't DHCP right

[Erick Bergquist]

It was a 3750 switch this time.

On Nov 14, 2007 2:31 PM, Randy Homyk <rhomyk at bellsouth.net> wrote:
>
>
>
>
> Did this happen to you on 3560 switches?  I just had a batch of 7940 phones
> that this just happened to me also.
>
>
>
> You are correct, the only work around is to register the phone the first
> time on the voice vlan.  After it registers for the first time it can be
> moved to a port that has  switchport access vlan XX  / switchport voice vlan
> XX
>
>
>
>
> Randy Homyk
>
> CCIE Voice #14584
>
> mailto:  rhomyk at bellsouth.net
>
> Phone: +786-269-5175
>
> Fax: +305-258-9156
>
> Mobile: 786-269-5175
>
>
>
>
>
>
>
>
>
> -----Original Message-----
>  From: cisco-voip-bounces at puck.nether.net
> [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Jason Aarons (US)
>  Sent: Wednesday, November 14, 2007 3:17 PM
>  To: Erick Bergquist; cisco-voip at puck.nether.net
>  Subject: Re: [cisco-voip] Cisco phones shipping with bad manufacturing
> loadthatcan't DHCP right
>
>
>
>
>
> Do you have a bug id? I haven't seen this behavior with 7940s/7941, doesn't
> mean there isn't a problem, jI ust haven't seen this behavior.
>
>
>
>  ________________________________
>
>
> From: cisco-voip-bounces at puck.nether.net on behalf of Erick Bergquist
>  Sent: Wed 11/14/2007 2:49 PM
>  To: cisco-voip at puck.nether.net
>  Subject: [cisco-voip] Cisco phones shipping with bad manufacturing load
> thatcan't DHCP right
>
>
> Anyone know why cisco phones still ship with a MFG phoneload that
>  can't DHCP on the voice VLAN correctly? The fix is to configure the
>  switchport in the voice vlan for data until it gets a firmware update.
>   This issue has been around awhile.
>  _______________________________________________
>  cisco-voip mailing list
>  cisco-voip at puck.nether.net
>  https://puck..nether.net/mailman/listinfo/cisco-voip
>
>
>
>
> ________________________________
>
>
>  Disclaimer: This e-mail communication and any attachments may contain
> confidential and privileged information and is for use by the designated
> addressee(s) named above only. If you are not the intended addressee, you
> are hereby notified that you have received this communication in error and
> that any use or reproduction of this email or its contents is strictly
> prohibited and may be unlawful. If you have received this communication in
> error, please notify us immediately by replying to this message and deleting
> it from your computer. Thank you.