[cisco-voip] Voice Mail Pilot CSS and MWI

[Justin Steinberg]

interesting...how do you have things configured?

Do you have DN's that are in ToD based partitions?  If so, what
happens when that time of day is closed and someone leaves a voicemail
for that DN?  Does MWI still work?  Does MWI CSS override the ToD part
of the partition?



On Nov 14, 2007 3:49 PM, Erick Bergquist <erickbee at gmail.com> wrote:
> Hmm. Well, since setting the VM Pilot CSS to be a CSS without the Time
> Of Day partition in it, all seems fine for MWI for this setup. The CCM
> traces no longer show the other partitions in the pss. The MWI On/Off
> DN CSS was set properly already before also.
>
>
> On Nov 14, 2007 2:44 PM, Wes Sisk <wsisk at cisco.com> wrote:
> > nope, don't believe so.
> >
> > mwi request from CMI uses CSS configured in CMI service parameter
> > mwi request from QSIG uses CSS configuredin CM service parameter
> > mwi request from sccp endpoint (unity, vg248) uses CSS of port to reach
> > mwi on/off number.  then uses the CSS of the mwi on/off number to reach
> > then endpoint.
> >
> > I'm not sure how many of these are affected by 'multi tenant mwi' where
> > translation patterns and assocaited CSS are applied to the call.
> >
> > /Wes
> >
> >
> > Erick Bergquist wrote:
> > > Does MWI use the Calling Search Space assigned to the Voice mail
> > > Pilot?  It seems this is the case, but I am not able to find this in
> > > any documents and the Help for this page web page in CCMAdmin just has
> > > a very generic CSS description.
> > > _______________________________________________
> > > cisco-voip mailing list
> > > cisco-voip at puck.nether.net
> > > https://puck.nether.net/mailman/listinfo/cisco-voip
> > >
> >
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>