[cisco-voip] Installing BARS after everything

[Scott Voll]

I think the docs are smokin crack.... you can't install bars on CRS
until you have the application installed from what I can remember.
I've always installed after.

Scott

On Nov 13, 2007 8:50 AM, Cucumber Green <greencucumber2007 at yahoo.com> wrote:
> I have a couple of CRS servers and Call Managers in several clusters that do
> not have BARS installed. So I can not really properly back them up. I was
> reading this doc prior to even try installing BARS on them , but then I came
> across this note:
>
> "Cisco strongly recommends that you install BARS before you install the
> supported Cisco IP telephony application."
>
> Does this means I am screwed? Have anyone installed BARS after having a
> working CRS or CM?
>
> (
> Cisco doc is
> http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_installation_guide_chapter09186a00801ebeac.html
> )
>
>
> ________________________________
> Never miss a thing. Make Yahoo your homepage.
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>