[cisco-voip] Access Valcom Paging from FXO port

[Countryman, Edward]

Second request on this to the group

When I dial the DAC for the paging port it waits a moment then fast
busy.  

Has anyone done this with a valcom from a cisco FXO port?


-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Countryman,
Edward
Sent: Tuesday, October 09, 2007 11:40 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Help with Paging interface


I've installed an FXO port in my router and believe I have it configured
correctly in CCM but cannot get it to open when connected to a VALCOM
V2000A.  

When dialing the route pattern for this port; it appears to sit for
several seconds then go fast busy.  It is almost like it is waiting for
something from the valcom (dial tone detect?)

I presently have the battery feed switch on the valcom set to ON. 

Any ideas?
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip