[cisco-voip] MGCP dial-peer order changing

[Lelio Fulgenzi]

MGCP for primary and H323 for fallback/SRST. So yes, I guess it's dial-peers 
for SRST only.

I was under the impression I needed two sets of dial-peers for the analog 
gateways in order for things to work.

----- Original Message ----- 
From: "Erick Bergquist" <erickbee at gmail.com>
To: "Lelio Fulgenzi" <lelio at uoguelph.ca>
Cc: "Ted Nugent" <tednugent69 at yahoo.com>; "Cisco VoIPoE List" 
<cisco-voip at puck.nether.net>
Sent: Saturday, September 01, 2007 1:52 AM
Subject: Re: [cisco-voip] MGCP dial-peer order changing


> Are you doing H323 and MGCP on the same gateway, or have dial-peers
> for SRST only?
>
> If it's all MGCP, then what I usually do is put application/service
> mgcpapp on all the dial-peers for analog/T1CAS ports to be on the safe
> side (IOS issues, full moon, etc causing a call to hit non-MGCP peer).
> For MGCP Fallback, these ports will fallback to H323 mode if the
> global default application is setup properly so the ports are usable
> when devices go into SRST mode.
>
> Anyway, I had one place last week that had a power outage and when the
> router came up all the dial-peers for the analog ports were missing
> the port command and service mgcpapp so inbound calls got dial tone.
> The router was rebooted w/same config previously multiple times
> without any problems. Go figure. MGC ra P makes your day once in
> awhile!
>
> On 8/31/07, Lelio Fulgenzi <lelio at uoguelph.ca> wrote:
>> dear lord. some of us want that ccm-manager config statement in there!
>>
>> i've got pretty recent code, 12.4T something, so why it's not fixed, who
>> knows.
>>
>>
>> ----- Original Message -----
>> From: "Ted Nugent" <tednugent69 at yahoo.com>
>> To: "Lelio Fulgenzi" <lelio at uoguelph.ca>; "Cisco VoIPoE List"
>> <cisco-voip at puck.nether.net>
>> Sent: Friday, August 31, 2007 3:07 PM
>> Subject: Re: [cisco-voip] MGCP dial-peer order changing
>>
>>
>> > This was a bug a LONG time ago.. the fix at the time
>> > was to remove "ccm-manager config" to prevent MGCP
>> > from recreating the dialpeers and writing them at the
>> > bottom... I have not had this problem in years though?
>> >
>> >
>> > --- Lelio Fulgenzi <lelio at uoguelph.ca> wrote:
>> >
>> >> OK, this is now the second time that I find my MGCP
>> >> dial-peers at the bottom of my dial-peer list after
>> >> I modified things to put them at the top.
>> >>
>> >> What is going on?
>> >>
>> >> Have others seen this?
>> >>
>> >> Lelio
>> >> > _______________________________________________
>> >> cisco-voip mailing list
>> >> cisco-voip at puck.nether.net
>> >> https://puck.nether.net/mailman/listinfo/cisco-voip
>> >
>> >
>> >
>> >
>> > ____________________________________________________________________________________
>> > Sick sense of humor? Visit Yahoo! TV's
>> > Comedy with an Edge to see what's on, when.
>> > http://tv.yahoo.com/collections/222
>> >
>>
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>