[cisco-voip] FXO Port for overhead paging

Lelio Fulgenzi lelio at uoguelph.ca
Wed Sep 26 15:02:16 EDT 2007


is this with the use of an adapter? the adapter has all these dials and 
knobs that protect agains that sort of stuff.

although a 130db screech would be interesting to see in our animal barns.

----- Original Message ----- 
From: "Jason Aarons (US)" <jason.aarons at us.didata.com>
To: "Lelio Fulgenzi" <lelio at uoguelph.ca>; "Countryman, Edward" 
<Edward.Countryman at provena.org>; <cisco-voip at puck.nether.net>
Sent: Wednesday, September 26, 2007 2:58 PM
Subject: RE: [cisco-voip] FXO Port for overhead paging


>I would disagree, FXS has limited supervision disconnect, stick with a
> FXO as best practice. I've seen FXS interfaces get stuck offhook and the
> paging units screech 130db noise....also ATA behaves differently between
> CCM and CME, FXO doesn't.
>
> -jason
>
> -----Original Message-----
> From: cisco-voip-bounces at puck.nether.net
> [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Lelio Fulgenzi
> Sent: Wednesday, September 26, 2007 2:54 PM
> To: Countryman, Edward; cisco-voip at puck.nether.net
> Subject: Re: [cisco-voip] FXO Port for overhead paging
>
> save yourself the trouble....get an adapter and use an FXS port. ;)
>
> we use the Bogen TAM-B.
>
> ----- Original Message ----- 
> From: "Countryman, Edward" <Edward.Countryman at provena.org>
> To: <cisco-voip at puck.nether.net>
> Sent: Wednesday, September 26, 2007 2:41 PM
> Subject: [cisco-voip] FXO Port for overhead paging
>
>
>> Has anyone successfully configured and used an FXO port to access an
>> overhead paging system?  All I can seem to find are E&M examples.
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
> -----------------------------------------
> Disclaimer:
>
> This e-mail communication and any attachments may contain
> confidential and privileged information and is for use by the
> designated addressee(s) named above only.  If you are not the
> intended addressee, you are hereby notified that you have received
> this communication in error and that any use or reproduction of
> this email or its contents is strictly prohibited and may be
> unlawful.  If you have received this communication in error, please
> notify us immediately by replying to this message and deleting it
> from your computer. Thank you.
>
> 



More information about the cisco-voip mailing list