[cisco-voip] Resource unavailable, unspecified

[Ali Kemal Yurtseven]

Hi,

I'm trying to establish a connection between a PBX and a 3660 router. 
When I try to place a call towards PBX, I get the following debug output:

00:49:53: ISDN Se6/0:15: TX -> SETUP pd = 8  callref = 0x000D
00:49:53:         Bearer Capability i = 0x9090A3
00:49:53:         Channel ID i = 0xA98386
00:49:53:         Calling Party Number i = 0x80, '7777', Plan:Unknown, 
Type:Unknown
00:49:53:         Called Party Number i = 0x81, '2102', Plan:ISDN, 
Type:Unknown
00:49:53: ISDN Se6/0:15: RX <- SETUP_ACK pd = 8  callref = 0x800D
00:49:53:         Channel ID i = 0xA98386
00:49:53: ISDN Se6/0:15: RX <- CALL_PROC pd = 8  callref = 0x800D
00:49:53:         Progress Ind i = 0x8182 - Destination address is non-ISDN
00:49:53: ISDN Se6/0:15: TX -> DISCONNECT pd = 8  callref = 0x000D
00:49:53:         Cause i = 0x82AF - Resource unavailable, unspecified
00:49:53: ISDN Se6/0:15: RX <- ALERTING pd = 8  callref = 0x800D
00:49:53:         Progress Ind i = 0x8188 - In-band info or appropriate 
now available
30064771072:00:210453397504: ISDN Se6/0:15: Ux_BadMsg(): Invalid Message 
for call state 11, call id 0x8008, call ref 0xD, event 0x1
00:49:53: ISDN Se6/0:15: TX -> STATUS pd = 8  callref = 0x000D
00:49:53:         Cause i = 0x80E501 - Message not compatible with call 
state
00:49:53:         Call State i = 0x0B
00:49:53: ISDN Se6/0:15: RX <- RELEASE pd = 8  callref = 0x800D
00:49:53:         Cause i = 0x8090 - Normal call clearing
00:49:53: ISDN Se6/0:15: TX -> RELEASE_COMP pd = 8  callref = 0x000D

What may be the cause of resource unavailable, unspecified disconnect 
message ?

-- 
Ali Kemal Yurtseven
Meteksan Net

Tel: +90 312 2979040
Fax: +90 312 2979271