[cisco-voip] Cannot access Admin page after IP address change - 6.1(2)

[Dave Wolgast]

I upgraded a CUCM 4.1(3) publisher to 6.1(2) and did the DMA restore.  I
then followed the instructions in "Changing the IP Address and Host Name for
CUCM 5.x and 6.x Servers" and changed both IP address and hostname.  (note:
at this point, there are no subscribers connected...they will be updated
later...Also, this PUB is on an isolated network...can't see DNS or the subs
listed in its database).  When the server rebooted, I could connect to the
root webpage at http://xxx.xxx.xxx.xxx, but could not reach it via https,
nor could I reach CCMAdmin, either using the link on the root page or via
direct URL.

I can SSH into the box and the box pings fine.  The CLI says the network is
OK and reflects the changed IP and hostname.

Will someone smarter than I please help troubleshoot/fix?  Thanks so
much!!!!

-- 
Dave Wolgast
Livonia, NY
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20081211/2763602a/attachment.html>