[cisco-voip] User Facing Features in 6.1(2)?

[Ryan Ratliff]

The db changes that allowed subscribers to do local db updates for  
user-facing features went into 6.0 actually.

-Ryan

On Dec 12, 2008, at 12:35 PM, Jason Aarons (US) wrote:

I did a CallForwardAll on a phone to off/on to test a subscriber is  
replicating, however TAC told me that 6.1(2) can use CFA when the  
publisher is down and to stick with RTMT/CCM Reports/CLI to check  
dbreplication.  I thought user facing features in subscribers was new  
to CUCM 7.0 not 6.1?



I didn’t find this info in the 6.1.2 release notes, did I overlook  
it?  What else works in 6.1.2 that didn’t use to work when publisher  
was down?



Disclaimer: This e-mail communication and any attachments may contain  
confidential and privileged information and is for use by the  
designated addressee(s) named above only. If you are not the intended  
addressee, you are hereby notified that you have received this  
communication in error and that any use or reproduction of this email  
or its contents is strictly prohibited and may be unlawful. If you  
have received this communication in error, please notify us  
immediately by replying to this message and deleting it from your  
computer. Thank you.

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20081212/d5a04334/attachment.html>