[cisco-voip] Strike 3 - Dead 7940G IP Phones - Update (Jason Aarons (US))

[FrogOnDSCP46EF]

Hi Jason,
Good recap!! Thanks for sharing this on this forum.

To check EMI, you can use a good CAT5/6 cable tester.

1. Check EMI of your bad cable - make a note of all parameters, there are
more than EMI.
2. Check EMI of your any of other good cable - and then compare the
parameter, at least you can show that comparative to your customer.

HTH


-- 
Smile, you'll save someone else's day!
Frog
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20081231/42dc5308/attachment.html>