[cisco-voip] FXO dial tone

[Paul Choi]

Kevin,

Use this website to search the list.

http://www.gossamer-threads.com/lists/cisco/voip/

http://tinyurl.com/36bm8p


--- Kevin Dunn <cheesevoice at gmail.com> wrote:

> I am going to ask two questions here:
> 1.  How do i search the mailing list to see if my
> question has already been
> asked to keep from bothering everyone?
> 
>  2.  I have an FXO port on a 2851 gateway, MGCP,
> connected to a VALCOMM 4
> zone paging system.  I have a route pattern
> 777.[1=4] (discard preDot) so
> only the 1-4.  I have the FXO port active on the
> gateway and active in CCM (
> 4.1.3).  but when I put a butt set on the FXO pair
> from teh router I get a
> dial tone...shouldnt' I only get dial tone from an
> FXS line?  FXO ports
> should "accept dial tone from teh CO right?"  It is
> loopstart in Call
> Manager,  I have no config on the voice-port on teh
> gateway.  Anyone want to
> educate the rediculously stupid?
> 
> Thanks so much
> Kevin
> > _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
> 



      ____________________________________________________________________________________
Be a better friend, newshound, and 
know-it-all with Yahoo! Mobile.  Try it now.  http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ