[cisco-voip] Minimum firmware ver. needed to upgrade from 3.1 to more current version?

[Jonathan Charles]

I think you need to check and see why the phone isn't updating its
firmware... are other phones on the CME getting the new code, did they
get the new code from that device...

Possible that you are missing some critical file it is looking for...
try downloading the firmware from Cisco and re-uploading it to the
router, make sure you add all of the tftp-server commands for each
file and serve up the file under telephony-services (probably
something .loads... leave off the .loads tho...)


Jonathan

On Feb 5, 2008 11:24 AM, Paul Choi <asobihoudai at yahoo.com> wrote:
> I have a very very stubborn 7960 phone that is stuck
> with a 3.1 firmware image on it under CCME. I can't
> force it to erase itself to factory default. It isn't
> working so I'm trying to find a firmware image that
> the phone will accept since it isn't automatically
> pulling the 7.2(T0.23) image it is supposed to
> pull...and then upgrade the phone to 7.2(T0.23).
>
> Where can I find this information?
>
> Paul
>
>
>       ____________________________________________________________________________________
> Looking for last minute shopping deals?
> Find them fast with Yahoo! Search.  http://tools.search.yahoo.com/newsearch/category.php?category=shopping
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>