[cisco-voip] R: RE - CUPC 1.2 - Calling using Outlook Contacts Fail

[alessandro.bertacco at alice.it]

Great! It's work fine, thank you very much Christopher!
 
Best Regards
 
Alessandro Bertacco

________________________________

Da: Christopher M. Bomba [mailto:cbomba at s4nets.com]
Inviato: mer 06/02/2008 14.27
A: cisco-voip at puck.nether.net
Cc: alessandro.bertacco at alice.it
Oggetto: RE - CUPC 1.2 - Calling using Outlook Contacts Fail



You need to create application dial rules.

Go into CallManager and select Call Routing > Dial Rules > Application Dial Rules.

I needed to create one because users don't have the 9 + 1 in front of their contacts.

So I said:

Name - Outlook Dialing 10-Digit
Description - 10 Digit Outlook Dialing
Number Begins With -
Number of Digits - 10
Total Digits to be Removed - 0 
Prefix With Pattern - 91

Now when users use their CUPC to click to dial a contact it uses this rule.  After you create the rule you need to restart CUPC because it needs to download these rules on start up


Chris
_______________________________________________________________________________________________________
Date: Wed, 6 Feb 2008 11:11:01 +0100
From: <alessandro.bertacco at alice.it>
Subject: [cisco-voip] CUPC 1.2 - Calling using Outlook Contacts Fail
To: <cisco-voip at puck.nether.net>
Message-ID: <FBCMMO01alUohIi6YEF00000a01 at FBCMMO01.fbc.local>
Content-Type: text/plain; charset="iso-8859-1"

Hi all, anyone have problem calling with Cisco Unified Personal Communicator from outlook contact?
I need to manipulate digit before call is sent to CUCM, but i don't know if possible and how.

Anyone can help me?

Regards

Alessandro Bertacco




-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20080206/3168c04f/attachment.html