[cisco-voip] Low voicemail volume

Jonathan Charles jonvoip at gmail.com
Thu Feb 28 20:07:53 EST 2008


I am pretty sure the problem is gw to unity... but normal call volume
is fine... this site has 8 analog ports and 10 users...



Jonathan

On Thu, Feb 28, 2008 at 7:01 PM, Erick Bergquist <erickbee at gmail.com> wrote:
> How is the volume if you call into the site and have someone transfer
>  you to a IP Phone at the location with Unity, to test if volume is
>  okay on a call across network between gateway and IP Phone at the
>  location where Unity is versus a call to Unity.
>
>
>
>  On Thu, Feb 28, 2008 at 5:06 PM, James Buchanan <jbuchanan at ctiusa.com> wrote:
>  > Hello,
>  >
>  >  I found this document:
>  >  http://www.cisco.com/warp/public/788/AVVID/ts_unityaudioq.html#volume.
>  >
>  >  It seemed to have some good tests for narrowing this down.
>  >
>  >  Thanks,
>  >
>  >  James
>  >
>  >
>  >
>  >  -----Original Message-----
>  >  From: Jonathan Charles [mailto:jonvoip at gmail.com]
>  >  Sent: Thursday, February 28, 2008 5:04 PM
>  >  To: James Buchanan
>  >  Cc: cisco-voip
>  >  Subject: Re: [cisco-voip] Low voicemail volume
>  >
>  >  Also, I am convinced this is happening during the recording process as
>  >  even the email attached wave files are of very low volume... also,
>  >  internal vmails (IP phone to IP phone) are fine.
>  >
>  >
>  >  Jonathan
>  >
>  >  On Thu, Feb 28, 2008 at 5:02 PM, Jonathan Charles <jonvoip at gmail.com>
>  >  wrote:
>  >  > Unity 5 using G.729 between sites, other remote sites are fine.
>  >  >
>  >  >
>  >  >
>  >  >  Jonathan
>  >  >
>  >  >
>  >  >
>  >  >  On Thu, Feb 28, 2008 at 4:47 PM, James Buchanan
>  >  <jbuchanan at ctiusa.com> wrote:
>  >  >  > Hello,
>  >  >  >
>  >  >  >  Is this to Unity? Which version? Also, what codec are you using to
>  >  >  >  communicate with Unity?
>  >  >  >
>  >  >  >  Thanks,
>  >  >  >
>  >  >  >  James
>  >  >  >
>  >  >  >
>  >  >  >
>  >  >  >  -----Original Message-----
>  >  >  >  From: cisco-voip-bounces at puck.nether.net
>  >  >  >  [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Jonathan
>  >  >  >  Charles
>  >  >  >  Sent: Thursday, February 28, 2008 4:44 PM
>  >  >  >  To: cisco-voip
>  >  >  >  Subject: [cisco-voip] Low voicemail volume
>  >  >  >
>  >  >  >  At one remote site we are getting really low voicemail volume from
>  >  >  >  outside callers (inside voicemails are fine), I have cranked the
>  >  >  >  playback volume in Unity to 'louder' to no effect.
>  >  >  >
>  >  >  >  We had a minor QoS issue, and our ping times from that location
>  >  are
>  >  >  >  around 250ms, but what could account for the low voicemail volume
>  >  (it
>  >  >  >  is almost inaudible)
>  >  >  >
>  >  >  >  This site uses 8 analogs, and the input gain is set to -3 and the
>  >  >  >  output attenuation is set to 3, calls themselves are fine... just
>  >  the
>  >  >  >  voicemails...
>  >  >  >
>  >  >  >  Any ideas?
>  >  >  >
>  >  >  >
>  >  >  >
>  >  >  >  Jonathan
>  >  >  >  _______________________________________________
>  >  >  >  cisco-voip mailing list
>  >  >  >  cisco-voip at puck.nether.net
>  >  >  >  https://puck.nether.net/mailman/listinfo/cisco-voip
>  >  >  >
>  >  >
>  >  _______________________________________________
>  >  cisco-voip mailing list
>  >  cisco-voip at puck.nether.net
>  >  https://puck.nether.net/mailman/listinfo/cisco-voip
>  >
>


More information about the cisco-voip mailing list