[cisco-voip] Outbound calls failing 0x80D2 - Identified channeldoes not exist

[David Sullivan]

cisco-voip-bounces at puck.nether.net wrote:
> Hi All,
> 
> I am experiencing a problem with outbound calls that I have not seen
> before doing a CCM implementation.   When attempting to place
> a call to
> the PSTN, it fails and debug isdn q931 reports the error
> "0x80D2 - Identified channel does not exist".  Incoming calls
> from the PSTN work correctly.

It's a fractional PRI that only has some of the channels activated? Are
you seeing incoming calls on 31?

David Sullivan
IT Services Systems Team
Barnet College
-----------------------------------------------------------------------------
This communication may contain privileged or confidential information which
is for the exclusive use of the intended recipient.  If you are not the
intended recipient, please note that you may not distribute or use this
communication or the information it contains.  If this e-mail has reached you
in error, please delete it and any attachment.

Internet communications are not secure and Barnet College does not accept
legal responsibility for the content of this message.  Any views or opinions
expressed are those of the author and not necessarily those of Barnet College.

Please note that Barnet college reserves the right to monitor the
source/destinations of all incoming or outgoing e-mail communications.
-----------------------------------------------------------------------------