[cisco-voip] Answer: Subsquent node

[Scott Voll]

I had the FQDN in the 1st node.  I changed it to the Host name and now it
works.....

Call it stupid user error ;-)

Scott

PS.  fixed it without TAC help after all ... LOL

On Wed, Jul 30, 2008 at 11:39 AM, Scott Voll <svoll.voip at gmail.com> wrote:

>  I had CMPUB and CMSUB in my 4.1 enviroment.
>
> Installed CM 6.1 with CM1 with the DMA..
>
> Brought up the second Node as CM2.
>
> Deleted CMSUB from the CM1 config and added CM2. (still have a Node license
> available)
>
> Now I get the error, "Connection to the server cannot be established
> (unknown Error)" when trying to start the services on CM2
>
> Need to have TAC do what?
>
> I just reinstalled CM2 per TACs request.
>
> Scott
> SR 609213575
>
>
> On Wed, Jul 30, 2008 at 4:57 AM, Wes Sisk <wsisk at cisco.com> wrote:
>
>> if you are reusing the same IP and just changing the name you are going to
>> need some TAC assistance.  cluster manager does not properly clean up hosts,
>> rhosts, sqlhosts for all the references to the old name.
>>
>> /Wes
>>
>> Scott Voll wrote:
>>
>>   I have a new cluster I'm bring up with 6.1.2 with a DMA from 4.1.3.
>>
>> 1st Node came up fine.
>>
>> I'm installing on new HW so I called them different names
>>
>> once the pub was up and I got my licensing I deleted the old sub name and
>> put in the new Sub name
>>
>> now when trying to start the services on the Sub I get Connection to the
>> server cannot be established (unknown error)
>>
>> Any ideas?
>>
>> I have a TAC ticket open
>>
>> Scott
>>
>> ------------------------------
>>
>> _______________________________________________
>> cisco-voip mailing listcisco-voip at puck.nether.nethttps://puck.nether.net/mailman/listinfo/cisco-voip
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080730/354afc2b/attachment.html>